Kodak ScanMate i900 Series, Руководство по настройке сканирования

Страница: 10 / 22

A-61734 March 2012
9
Scan Area dialog box
The Scan Area dialog box allows you to define the amount of image
data which is returned to your PC.
NOTE: Select the side and image to be defined by highlighting Front
Image #1, Front Image #2 , etc. based on the cropping option
(either Fixed to Transport or Relative to Document ) selected
for each of these in the Main tab. The scan areas defined for all
camera selections are independent.
Page Size
⎯
the default paper size is set when a scanner is selected.
You can choose a different paper size using the drop-down list.
NOTE: Page Size and Page Layout selections also appear on the
Layout tab. If you make a change on the Scan Area dialog box,
the same selections will be displayed on the Layout tab and vice
versa.
Page Layout
• Portrait : displays the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape: displays the image orientation in the shape of a
conventional landscape painting, where width is greater than height.
Area
• Snap
⎯
enable this option to control the dimensions of the preview
area to fixed 1/8-inch increments. This option is not available in
Pixels mode.
• X : the distance from the left end of the scanner to the left-edge of the
scanning area.
• Y: the position from the top end of the document to the top end of the
scanning area.
• Width : the width of the scanning area.
• Height: the height of the scanning area.
Units — select whether you want the area to be defined in Pixels ,
Inches or Centimeters .