Kodak ScanMate i1150, Руководство пользователя

Страница: 27 / 40

A-61816 April 2014
4-9
Replacement
procedures
Kodak Scanners use replaceable feed roller modules that can feed a
wide range of document types, sizes and thicknesses. Module life and
performance will vary based on the customer’s document set, the
frequency of cleaning the paper path and tires, and following the
recommended schedule for changing the module. The nominal feed
roller module life is approximately 125,000 pages. Usage figures are
not guaranteed. Customer-operating environments, document type, the
condition of documents being scanned, and not following the
recommended cleaning and replacement procedures, can cause the
life of the consumables to vary. Change the feed roller module if you
notice an increase in multiple feeds, stoppages, or a decrease in feeder
performance that is not resolved by following the cleaning procedures.
NOTES:
• Before replacing parts, disconnect the electrical power.
• Certain paper types (such as carbonless paper or newsprint), failure
to clean regularly, and/or use of non-recommended cleaning solvents
can shorten roller life.
Replacing the separation
roller 1. Remove the pre-separation pad by grasping it and pulling it out of
position.
2. Remove the separation roller.
3. Install the new separation roller by aligning the tab with the slot and
snapping it into position.
4. Re-install the pre-separation pad by aligning the slots with the holes
on the pre-separation pad and snapping it into place.