5
Position the beam indicated device as close as possible to the patient.
6
Activate the sensor.
The sensor activation can be done by :
The RVG icon will turn into green
You can also orientate the image before acquisition.
By default, the image displays vertically as if an image
of a tooth from the lower dental arch was acquired.
You now have 90 seconds to take the X-ray image.
7
Trigger the X-ray emission.
The image will automatically be displayed on your computer screen.
6
a-
either
clicking on
the RVG
icon on the
software
toolbar
b-
or
pressing
on F2 on
the keyboard
c-
or
using the button
on the sensor
remote
control.
Guide_RVG6100_5100_GB 21/08/06 14:31 Page 6
