)
)
Contents
Specifications 2
Setting Up 5
Preparation for Threading 6
Threading for Sound Pictures 6
Threading for Silent Pictures 8
Check Setup and Run the Show 8
Rewinding 10
After the Show 10
Microphone • Phonograph 11
Sound Optics 11
KODAK
SUPER-40 Shutter 12
Operating Tips 13
Seating Arrangements 14
Screen and Lens Combinations 14
Accessories 15
Replacing Projection Lamp and
Cleaning Lens 16
Cleaning Film Gate 16
Cleaning Sound Optics 17
Cleaning Sound Drum 17
Oiling 17
Replacing Belts 18
Replacing Exciter Lamp 18
Service Facilities 19
SERIAL NUMBER
The serial number is stamped on the
nameplate to the right of the thread light
receptacle on the amplifier control panel
(see Figure 1). Make a record of this number
and keep it in a safe place.
The serial number should be included in any
correspondence about the projector.
NOTE
Carefully read and follow the operating
instructions presented in this manual.
After a preliminary reading of the instruc
tions, practice threading, projecting, and
rewinding with a reel of sound film so that
you become familiar with the machine
before the first show.
How to Use the
Kodak
Pageant
Arc
Projector
3
