Kodak Magnus VLF Q2400 страница 13 Скачать руководство пользователя | Manualshive

Страница: 13 / 48

background image

Figure 8: Dataplate label on the APL option for Magnus VLF platesetters

Sources of additional safety information

The safety information in this document applies to the operation and
maintenance of the platesetter and its options.

If you have questions about the safe use of the platesetter, contact an
authorized service representative.

For other Kodak or third-party products, see the safety documentation
provided by the manufacturer of that equipment. For comprehensive
safety guidelines for a prepress environment, consult the safety officer
at your workplace.

For Kodak documentation, training courses, downloads, safety and
compliance information, service and support contacts, links to Safety
Data Sheets (SDS) or other information about this device, go to your
Kodak service and support portal at

https://partnerplace.kodak.com/

.

Types of safety messages

Messages with a safety icon and the signal word

DANGER

,

WARNING

,

or

CAUTION

provide important safety information. Messages with the

signal word

NOTICE

alert you to the possibility of damage to the

platesetter.

DANGER: Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.

WARNING: Indicates a potentially hazardous situation, which, if not avoided, can
result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, could
result in minor or moderate injury.

NOTICE: Indicates a situation which, if not avoided, could result in damage to the
platesetter.

Sources of additional safety information

7

«
...
11
12
13
14
15
...
»

Содержание Magnus VLF Q2400

















































Отзывы:

Нет отзывов

Похожие инструкции для Magnus VLF Q2400

Бренд: Olympus Страницы: 2

Бренд: Olympus Страницы: 148

WorkCentre Pro 40

Бренд: Xerox Страницы: 14

Бренд: Magicard Страницы: 2

Бренд: Magicard Страницы: 2

Бренд: Oki Страницы: 28

Бренд: Oki Страницы: 22

image RUNNER 3045

Бренд: Canon Страницы: 14

Бренд: Oki Страницы: 512

Compa II Series

Бренд: Valentin Страницы: 110

Бренд: Oce Страницы: 268

Бренд: GCC Technologies Страницы: 8

16C0365 - 5500 MFP

Бренд: Lexmark Страницы: 88

ECOSYS M6035cdn

Бренд: Kyocera Страницы: 31

DURA PRINTER SI600

Бренд: Nitto Denko Страницы: 174

Бренд: Rice Lake Страницы: 86

Бренд: Jolimark Страницы: 31

Бренд: Magicard Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды