5
Before using the projector, connect it to the charger, plug the USB end of the charging cable into a wall
charger or similar power source and allow it to fully charge. This process should take about three hours.
Always use the original charger that was provided to ensure proper charging, and make sure the power
rating of the adapter for the charging cable is ≤ 2.4A.
The four indicator lights will show the approximate battery capacity, with each light representing
approximately 25% battery life. One indicator light lit means the battery is at less than 25% and should
be charged soon. Two lights means the battery percentage is between 25% and 49%, and so on. Four
lights lit means that battery is fully charged.
When the projector is powered on, you can connect the charging cable of your device to the USB
port of the projector, and it will operate as a mobile power bank to charge your electronic devices. The
power output is 5V/1A.
6. CHARGING THE PROJECTOR
7. USING THE PROJECTOR TO CHARGE DEVICES
While the projector does include built-in speakers for regular use, you can also connect either
headphones or a portable speaker to the 3.5mm AUDIO OUT jack as shown in the below image.
8. USING THE AUDIO OUT JACK
