Taking pictures and videos
www.kodak.com/go/support
24
Flash Strength Control
Select the brightness of
the flash.
This setting remains until
you change modes or turn
off the camera.*
–1.0, –0.7, –0.3, 0.0 (default), +0.3, +0.7,
+1.0, Max Power
At Max Power, the flash is fired at full strength
with no compensation for the pre-flash.
Unavailable in Video, Auto, and Scene modes.
AF Control
Choose auto-focus
method.
This setting remains until
you change modes or turn
off the camera.
CONTINUOUS AF—
When picture taking is
enabled, the focus is continuously adjusted.
SINGLE AF (default)—
Correct focus is
obtained once when the Shutter button is
pressed halfway down.
Unavailable in Auto and Scene modes.
Exposure
Compensation
Choose how much light
enters the camera.
This setting remains until
you change modes or turn
off the camera.*
For Custom mode—
0.0 (default), ±0.3,
±0.7, ±1.0, ±1.3, ±1.7, ±2.0
For Auto mode—
0.0, ±1.0, ±2.0
When the majority of the subject is white,
positive compensation prevents the white areas
from turning out gray. When the majority of the
subject is black, use negative compensation.
In backlit situations when you are not using the
flash, positive compensation prevents faces
from coming out dark.
Set Left Right Button
Set the functions to be
used with
.
This setting remains until
you change modes or turn
off the camera.*
Exposure Compensation (default), Flash
Strength Control, WHITE BALANCE, ISO
SPEED, LATITUDE
Only available in Custom mode.
Setting
Icon
Options
* If Setting Memory (see
page 27
) is set to ON, these settings remain even if
you turn off the camera.
