A-61626 January 2010
41
Device - General tab
The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper Source
• Automatic:
looks for paper in the document feeder first. If there are
no documents in the input tray, the scanner will scan from the flatbed.
•
Document Feeder
: the scanner will only scan documents from the
input tray.
•
Flatbed
: scanner will scan from the flatbed.
NOTE:
Automatic
and
Flatbed
options are only available if you had
the flatbed accessory attached when the scanning application
connected to the scanner.
Power Saver
— allows you to set the amount of time, in minutes, the
scanner has to be inactive before going into power saver mode.
Document Feeder
•
Timeout
: allows you to select the amount of time, in seconds, the
scanner will wait once the last document enters the feeder before the
timeout occurs.
Action when timeout occurs
: indicates the action that will be taken
when the document feeder timeout has been reached.
-
Stop Scanning:
scanning will stop and control will return to the
scanning application (i.e. ends the job).
Diagnostics
— displays the Diagnostics tab.
