52
www.kodak.com/go/support
Using an Eye-Fi Card
Changing Eye-Fi settings
1
In a picture-taking mode, press the Menu button
.
The Settings menu appears.
2
Press
to highlight Eye-Fi, then press the OK button.
3
Choose Selective Share (recommended).
When you’re in range of your known Wi-Fi network, turn on the camera to transfer
pictures to your computer or mobile device.
Other Eye-Fi Information
■
It’s critical that you disable (do not turn on) Endless Memory Mode in
Eye-Fi Center Software.
■
As of December 2010, Eye-Fi Cards are certified for use in the countries and
regions in which they were purchased.
■
The Eye-Fi Card has a wireless LAN function. Do not insert the Eye-Fi Card where
Wi-Fi is prohibited, such as while aboard an airplane or in a hospital.
■
Even when you set Eye-Fi to off, the card may transmit radio waves.
■
The card may become warm during use. This is normal.
■
Battery life is reduced when using an Eye-Fi Card.
■
For the best reception when transferring pictures to a computer or mobile device,
the rear (LCD side) of the camera should face the Wi-Fi access point.
For Eye-Fi troubleshooting,
see page 56
.
Get support for Eye-Fi Cards and Software
support.eye.fi
