16
www.kodak.com/go/support
Taking pictures/videos
Using the Self-timer/Burst button
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1
Choose a setting:
10 seconds—
A picture is taken after a 10-second delay (so you have
time to get into the scene).
2 seconds—
A picture is taken after a 2-second delay (for a steady,
shutter release).
2 shot—
The first picture is taken after a 10-second delay. A second
picture is taken 8 seconds later.
2
Compose the scene. Press the Shutter button and
pause halfway down
halfway
(to focus).
Continue pressing
the Shutter button until it’s
completely
down
(to start the self-timer).
The Self-timer light blinks until a picture is taken.
NOTE: Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button
completely down. When the self-timer is off, the icon shown is
. You can also press the Menu
button
(
see page 45
) to access this setting.
Press the Self-timer/Burst button to cycle through
available modes. The current mode appears at the
bottom of the LCD.
10
2
2x
