Troubleshooting
www.kodak.com/go/support
80
Picture quality
Problem
Possible causes and/or solutions
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (
page 16
) or change your position so light is not behind
the subject.
■
Move so that the distance between you and the subject is within the
effective flash range (
page 16
).
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the AF framing brackets turn green, press the
Shutter button
completely down
to take the picture.
■
Increase the exposure compensation (
page 31
).
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn flash off (
page 16
).
■
Move so that the distance between you and the subject is within the
effective flash range (
page 16
).
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the AF framing brackets turn green, press the
Shutter button
completely down
to take the picture.
■
Decrease the exposure compensation (
page 31
).
Picture is not clear
■
Select a scene mode that matches the scene you are trying to capture
(
page 28
).
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the AF framing brackets turn green, press the
Shutter button
completely down
to take the picture.
■
Clean the lens (
page 102
).
■
Make sure the camera is not in Close-up mode if you are more than
21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
