38
www.kodak.com/go/support
Troubleshooting
Picture quality problems
Direct printing (PICTBRIDGE enabled printer) problems
Status
Solution
Picture is not clear
■
Clean the lens (
see page 42
).
■
Place the camera on a flat, steady surface or use a tripod (especially
in low light).
■
Use a larger picture size (
see page 27
).
■
If you’re manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures (
see page 28
).
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (
see page 7
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 40
.)
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (
see page 7
).
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 40
.)
Status
Solution
Cannot find the
desired picture
■
Use the Direct printing menu to change the image storage location.
The Direct printing
menu interface turns
off
■
Press any camera button to redisplay the menu.
Cannot print pictures
■
Make sure there is a connection between the camera and the
printer (
see page 32
).
■
Make sure the printer and the camera have power.
