Troubleshooting
www.kodak.com/go/support
39
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Transfer the picture to the computer (
page 15
).
Shutter button
does not work.
■
Turn on the camera (
page 2
).
■
Wait until the ready light stops blinking red before attempting to take
another picture.
■
Transfer pictures to the computer (
page 15
), delete pictures from the
camera (
page 13
), switch image storage locations (
page 26
), or
insert a card with available memory (
page 4
).
■
For best pictures, see
page 5
.
Slide show does
not run on external
video device.
■
Adjust the camera Video Out setting (NTSC or PAL,
page 28
).
■
See the external device’s user’s guide.
Picture is too light.
■
Move so there is at least 3.3 ft (1.0 m) between camera and subject.
■
Decrease Exposure Compensation (
page 25
).
Picture is not clear.
■
Clean the lens (
page 55
).
■
Move so there is at least 3.3 ft (1.0 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■
Turn on the flash (
page 8
).
■
Move so there is no more than 7.9 ft (2.4 m) between the camera and
the subject.
■
Use Fill flash (
page 24
) or change your position so light is not behind
the subject.
■
Increase Exposure Compensation (
page 25
).
If...
Try one or more the following
