36
www.kodak.com/go/support
Troubleshooting
Troubleshooting
Camera problems
Status
Solution
Camera does not
turn on
■
Make sure the battery is charged and installed correctly (
see
page 1
).
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark.
■
Adjust the LCD Brightness setting (
see page 30
).
Pictures remaining
number does not
decrease after taking a
picture
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire
■
Check the flash setting, and change as needed (
see page 8
).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full
■
Transfer the pictures to the computer (
see page 32
).
■
Delete pictures from the card (
see page 18
) or insert a new card.
Memory card not
recognized or camera
freezes with card
■
Card may be corrupted. Format the card in the camera (
see
page 31
).
■
Use another memory card. Only SD or SDHC Cards are supported.
Battery life is short
■
Verify that the correct battery type is installed (
see page 44
).
■
Wipe the battery contacts with a clean, dry cloth before inserting
it in the camera.
■
Insert a new/charged battery (
see page 1
).
■
Limit the time you review pictures/videos on the camera LCD.
■
Purchase batteries at
www.kodak.com/go/accessories
.
