User Guide KODAK DP2900 Digital Projector
22
Starting the Projector
We recommend using a surge protector power strip when connecting
your projector.
&DXWLRQ $OZD\VXVHWKHSRZHUFRUGWKDWVKLSSHGZLWKWKH
SURMHFWRU
1. Remove the lens cap.
2. Plug the power cord into the side of the projector, then plug it into
your electrical outlet.
The fans start to run, and the Lamp LED on the top of the
projector lights orange until the software has initialized. When
initialization is complete, the Lamp LED lights green. A green
Lamp LED indicates that you can press the
lamp on/off
button
to turn the lamp on and off.
Note:
The first time you connect your computer to the projector, the
computer may display a message stating that new hardware
was found. The Add New Hardware Wizard may appear. Use
the Wizard to load the correct driver (the computer considers
the projector a Plug and Play Monitor).
3. Turn on the lamp by pressing the
lamp on/off
button
on the
keypad.
The startup screen appears.
4. If you connected a video source, turn it on.
The video image should display on the projection screen. If a
computer source is active, press the
source
button
on the
keypad (page 30) or press the
video
button
on the remote to
display your video image. You can select a default source to
determine which source the projector examines first during
power-up for active video; see “Default Source” on page 39.
Use the
volume
buttons
to adjust the volume.
