Kodak DCS Pro SLR/n, Руководство пользователя

Страница: 224 / 244

C-2 April 29, 2004
Troubleshooting
Lo appears Lo appears Underexposure warning (subject is
too dark). In P mode, use flash.
In S mode, select a slower shutter
speed.
In A mode, select a larger aperture
(smaller f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use flash.)
— Electronic analog
exposure display
blinks Subject brightness is beyond
camera’s exposure range. When the subject is bright, use an
ND filter. When the subject is dark,
use flash. The electronic analog
exposure display blinks when the
Speedlight is used.
buLb blinks buLb blinks Shutter speed is set to buLb in S
mode. Cancel the buLb by selecting 30
seconds or faster shutter speed, or
select M mode to perform Long
Time exposure.
Shutter speed
indication blinks 125 appears The selected shutter speed is faster
than sync speed in S or M mode. Release the shutter as it takes a
flash picture. Shutter speed
automatically shifts to 1/125
second.
— blinks for 3
seconds after flash
Flash has fired at full output and
underexposure may have occurred. Capture the image again after
confirming focus distance,
aperture, or flash shooting distance
range.
Err blinks Err blinks Malfunction detected. Release the shutter again. If the
warning indication remains, or this
warning appears frequently,
contact your camera dealer.
Top Status LCD Viewfinder Cause Remedy