Kodak DCS Pro SLR/n Скачать руководство пользователя страница 202

Страница: 202 / 244

14-2

April 29, 2004

Camera Care

Cleaning

CAUTION

Remove the lens from the camera before cleaning.

1. Turn off the camera.

2. Disconnect the camera from the AC adapter and from the computer.

3. Using a damp cloth, clean only the outside of the camera body, the

Top Status LCD, the Back Status LCD, and the Image LCD.

NOTE: Do not use liquid cleaners or aerosol cleaners on the outside of

the camera.

4. Clean the viewfinder eyepiece with a soft, clean cloth. Do not use

alcohol.

5. To remove dust from the mirror or focusing screen, gently blow the

dust away using a commercially available bulb-type blower. Avoid
directly touching any of these surfaces.

6. Clean the lens surface with a blower brush. To remove dirt and

smudges, remove the lens from the camera, then use a soft, clean
cotton cloth or lens tissue moistened with lens cleaner. Wipe in a
circular motion from center to outer edge, taking care not to leave
traces and not to touch the other lens parts.

NOTE: Do not lubricate the camera.

Содержание DCS Pro SLR/n





















































































































































































































































Результаты поиска

Содержание DCS Pro SLR/n

Отзывы:

Kodak DCS Pro SLR/n, Руководство пользователя, Страница: 202 / 244

Результаты поиска

Содержание DCS Pro SLR/n

Отзывы: