Kodak DCS PRO BACK - USER'S GUIDE, Руководство пользователя

Страница: 59 / 105

Using the Camera Connected to a Computer
59
Contents
Back
Next
Index
Powering Your Camera
When connected to the computer, your camera
receives its power from the included AC adapter
(via the IEEE 1394 interface) or a compatible
battery. If you use an IEEE 1394 cable other than
the one included with your DCS Pro Back Plus,
ensure that it is a 6-wire IEEE 1394 cable (4-wire
cables will not work).
If you do not use the AC adapter with the IEEE
1394 cable, the DCS Pro Back Plus will not
receive enough power. An error message
appears.
To Power the Camera
With the IEEE 1394 cable and DCS Pro Back
Plus AC Adapter
(page 55) or a compatible
battery (page 61) connected, turn the computer
on.
It takes 5-6 seconds for the DCS Pro Back Plus
to activate once the initial power signal is
received. When ready, the Camera Ready LED
illuminates. (The Power button has no effect
when power is supplied by the IEEE 1394
connection.)
"
If you turn the Image LCD on, it turns off
automatically after the time specified in the
Display Off Time property
(page 51) .
To Turn the DCS Pro Back Plus Off
Disconnect the IEEE 1394 cable.