Kodak D4600 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 60

Kodak D4600 Скачать руководство пользователя страница 12

2-4

November 2014

Setting Up the Printer

3. Connect the USB cable (not included) to the USB connector on

the back of the printer and to the USB connector on the computer.

Turning On the Printer

Move the power switch to the On (

|

) position.

On the operator panel, the orange Power light illuminates. If paper
and ribbon are loaded,

Ready 8 x 10

or

Ready 8 x 12

appears,

depending on the size of ribbon that is loaded.

To turn off the printer, move the power switch to the Off (

)

position.

Handling and Storing the Paper and Ribbon

For the best quality prints, carefully handle and store the paper
and ribbons.

• To avoid fingerprints, handle the ribbon by the spool ends and

the paper by the edges. Do not touch the ribbon material or
the glossy sides of the paper.

• Store the paper and ribbons away from direct sunlight, at

a temperature of 30°C (86°F) or lower and a relative humidity
of 60% or lower.

«
...
10
11
12
13
14
...
»

Содержание D4600





























































Отзывы:

Нет отзывов