40
www.kodak.com/go/support
Troubleshooting and support
Printing error.
■
Make sure your printer is on and the USB cable is
securely connected (
page 13
).
■
Check your printer for more info.
Time out occurred while printing.
■
Check cables and printer supplies. Print again.
Unable to create file. Device write
protected or full.
The frame was unable to copy the picture.
■
Insert a different card or device (
page 5
), or change
the picture location setting (
page 8
).
■
Remove write protection, unlock card.
■
Delete pictures from card.
Disk full.
Unable to get dynamically
assigned IP address.
DHCP (see Glossary) is not enabled at the router.
■
Make sure your router is properly configured and
DHCP is enabled.
■
Contact your system administrator or the person who
set up your wireless network.
Verify network settings.
■
Contact your system administrator or the person who
set up your wireless network.
Verify security code.
You have network security turned on.
■
Enter the security code you created when you set up
your wireless network.
■
Contact your system administrator or the person who
set up your wireless network.
Write failed. Select another
location.
The frame was unable to copy the picture.
■
Insert a different card or device (
page 5
), or change
the picture location setting (
page 8
).
Screen message
Try one or more of the following
