
www.kodak.com/go/aiosupport
19
KODAK ESP 3.2 / 3.2s All-in-One Printers
Connecting and Using Wi-Fi Direct for a Mobile Device or Computer with WPS
1. Press .
2. Touch
, then touch
Network Settings
.
3. Touch
, then touch
Manage Wi-Fi Direct
.
4. Touch
Connect a Device Using WPS
.
IMPORTANT:
Before you make a selection on the printer, make sure you know:
• the location of the push button on your mobile device or
computer — it will be a button on your device, or a virtual button in the device
software.
• where to generate a WPS Pin on your mobile device or computer.
5. Select one of these methods to connect your device:
6. To print from a mobile device, see
Mobile Printing, page 61
.
7. To print or scan from a computer:
a. Go to
www.kodak.com/go/esp3_2downloads
(for ESP 3.2 Printers) or
www.kodak.com/go/esp3_2sdownloads
(for ESP 3.2s Printers).
b. Select the All-in-One Printer Software for your operating system.
c. Follow the on-screen instructions to install the software. (The printer and
scanner drivers are installed when you install the software.)
d. To print, see
Printing, page 50
. To scan, see
Scanning, page 77
.
Push Button Configuration
Enter a WPS Pin
NOTE: You will have two minutes to
press or select the WPS button.
a. Touch
Push Button Configuration
.
b. On your mobile device or computer,
press (or select) the WPS button.
c.
Touch
OK
on your printer control
panel.
a. Touch
Enter WPS Pin
.
b. On your mobile device or
computer, locate the Pin screen
and generate a WPS Pin.
c. Enter the WPS Pin on your printer
control panel, then touch
OK
.