
Troubleshooting
104
www.kodak.com/go/aiosupport
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer: one on the on/off button that indicates power, the other indicates Wi-Fi
status.
Power light
Wi-Fi connectivity LED
Power light
What it means
Off
• The printer is turned off.
– Press the power button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the
back of the printer and into an electrical outlet, and
that the electrical outlet has power.
Blinking
• The printer is busy.
– Wait for the printer to finish the task.
On
• The printer is ready.
Wi-Fi connectivity LED
What it means
Off
The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continuously
The Wi-Fi radio is turned on, and the printer is searching for
available wireless networks within range.
Blinks intermittently
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted, or is too weak to send
signals to and from the printer.
To find and connect to an available wireless network within
range, touch
OK
, turn the Wi-Fi radio off, and run the Wi-Fi
Setup Wizard (see
Connecting to a wireless network,
page 9
).
On
The Wi-Fi radio is turned on, and there is a working
connection between the printer and a wireless network.