background image

 

Kodak 10/100 NIC Introduction and Configuration

 

July 1998

1-3

 

I

N

T

R
O
D
U
C

T

I

O
N

 

Chapter 10

 

 - Unix

 

Chapter 11

 

 - Network Printing: Summarizes techniques for printing from 

Windows, Macintosh and Unix platforms.

 

Chapter 12

 

 - TroubleShooting: Provides ßow charts and speciÞcs on 

various steps.

 

Appendix A 

 

- Telnet ConÞguration Utilities

 

Appendix B 

 

- 3rd Party Networking Utilities

 

Appendix C - 

 

Upgrading NIC ÒFlashÓ Firmware

 

Appendix D - 

 

NIC SpeciÞcations

 

Appendix E - 

 

Technical Assistance

 

1.4 NIC Package Contents

 

The Kodak 10/100 NIC may come already installed in your printer; it may 
also be separately purchased as an option to support network printing. 

 

If the NIC was pre-installed

 

, the following items should be included with 

the printer, software and documentation packages:

¥

10/100 Network Interface Card

¥

UserÕs Guide (this manual)

¥

1 diskette - ConÞguration Utilities for  DOS/Windows

¥

1 diskette - ConÞguration Utilities for  Macintosh

¥

1 diskette - ConÞguration Utilities for  Unix

¥

Ethernet Hardware Address labels

¥

Anti-static strap

¥

Kodak Printer Drivers and Export Modules for Windows and/or 
Macintosh.

 

If you purchased the NIC as an option

 

, you should have all the items 

listed above except the Windows and Macintosh drivers and export 
modules software and documentation. These items were included with 
your printer.

Содержание 3H0610











































































































































































Отзывы: