manualshive.com logo in svg

Kodak 3000DSV, Руководство оператора

Поделиться
Скачать
Kodak 3000DSV Скачать руководство пользователя страница 8

1-2

A-61371   April 2003 

Product description

The 

Kodak

 3000DSV Digital Scanner-Printer scans images and outputs 

to the Video Laser Printer through the optional PC interface. The 
3000DSV Scanner is ideal for medium-high volume scanning of all 
formats of media from microfiche, jackets, aperture cards, 16 and 35 
mm roll film and 16 mm M and ANSI cartridges.

Installation

Placement of the unit in the environment described below will ensure 
optimal performance throughout the long life of service for which it was 
designed.

• A well-ventilated place.

• An area which is free from ammonia or other organic gases.

• A place which has easy access to a power outlet so that the unit may 

be easily plugged in and unplugged.

• Any area free from direct sunlight.

• A place which is out of the direct air stream of an air conditioner, 

heater or ventilator and is not subject to extremely high or low 
temperatures or humidity.

• A stable location with a flat surface that is not subject to undue 

vibration.

• A place that is free from any object that would block the heat exhaust 

duct of the printer.

• A place away from curtains or anything else that is easily flammable.

• An area that is safe from spilled water or other liquids.

• A dust-free location.

NOTE: If the scanner is located near a window, do not face the screen 

towards the window.

Содержание 3000DSV







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды