Printer Setup 1-20
ENCAD
®
T-200
TM
Reference Guide
12 In the
Ports
dialog, select
LPT1
and click
NEXT
. (If your printer is networked, select
the networked printer.)
13 In the
Plotter Name
dialog, enter a new name here for your printer or use the
default name and click
NEXT
. Make sure you read the note under the plotter name
field.
14 Click
Finish
. You should see your printer appear in the list of printers.
15 To configure your driver, double click on your printer in the list.
ADI driver
The ENCAD ADI driver lets you print to Encad printers from AutoCAD. Use it to print
files created with AutoCAD Windows Releases 12, 13, and 14. This driver version 6
uses the HP-RTL command language to send data to the printer.
Remove Prior Versions of ENCAD ADI Drivers
If you have prior versions of ENCAD ADI drivers installed, you must first remove them.
Many of the initialization files have been changed with this release so conflicts may arise
if you don’t first remove the old drivers. Then run the installation program to install the
new driver files. The installation program will make the necessary changes to your
AutoCAD files, or allow you to change them manually.
The ENCAD ADI driver version 6 uses the HP-RTL or HP-GL/2 command languages to
send data to the printers.
Warning
: Before you remove or modify any of your files, be sure that you have secure
backups.
Remove Encad Printer Configurations
Start up AutoCAD and go to AutoCAD's Configuration Menu. Choose Configure A
Printer, and then Delete A Printer. Delete all configurations of Encad printers.
Remove Prior Version Driver Files
Locate the directory which contains the Encad driver files. Typically this directory is
name "ENCAD" and is a sub-directory under AutoCAD "DRV" driver subdirectory.
Remove any files with the extension .exp or .dll from the Encad directory.
Do not delete
files from other directories!
