Troubleshooting
www.kodak.com/go/support
51
Camera ready light status
Camera/computer communications
If
Try one or more of the following
Ready light does
not turn on and the
camera does not
work.
■
Turn on the camera (
page 2
).
■
Install new batteries (
page 1
) or charge rechargeable batteries.
■
Turn camera off, then back on.
Ready light blinks
green.
■
Camera is operating normally.
Ready light blinks
amber.
■
Wait. Resume picture taking when the light stops blinking and turns
green.
Ready light blinks
red and camera
turns off.
■
Install new batteries (
page 1
) or charge rechargeable batteries.
Ready light glows
steady red.
■
Transfer pictures to the computer (
page 44
), delete pictures from the
camera (
page 15
), switch image storage locations (
page 30
), or insert
a card with available memory (
page 3
).
■
Wait. Resume picture taking when the light turns off.
■
Change the image storage location to internal memory (
page 30
), or
use a different card.
Ready light is off or
glows steady
green.
■
Camera is operating normally.
If
Try one or more of the following
Cannot transfer pictures.
(The Add New Hardware Wizard
cannot locate drivers.)
■
Disconnect USB cable. (If using camera dock or printer
dock, disconnect cable and remove camera from
dock). Close all open applications. Re-install the
software (
page 43
).
■
Disconnect the USB cable. Close all open applications.
Re-install the software (
page 43
).
