2
This LED Ceiling Light is suitable for use in any indoor location (e.g. home, office, warehouse,
workshop, garage, and etc.). This light has the following unique features:
• Built-in Smart Sensor Control System: This LED Ceiling light is operated by a Smart
Sensor Control. It will automatically turn on when motion is detected and will turn off
automatically after no movement is detected in the area for preset time.
• Convenient Wireless Remote: With the remote control, you can easily adjust the light
color, brightness, sensor distance, and the timer for auto-off.
• Adjustable Light Color: Along with the remote control, you can easily adjust the light
color from warm white to cool white for the best fit for your environment.
• CRI 90: The high CRI (color rendering index) helps show the object color more naturally
and clearly than lights with lower CRI ratings.
Important Safety Instructions:
Please read the following safety information before use.
To reduce risk of fire, electric shock, or injury to persons:
• Turn OFF the main power at the fuse or circuit breaker before installing the light
fixture or making any electrical connection.
• Make sure this light fixture is adequately grounded. To ensure proper grounding,
there must be a separate ground wire (bare copper) contact between this light
fixture and the ground connection of your main power supply panel. Do not connect
the bare or green insulation fixture ground wire to the black (hot) current-carrying
wire or the white (neutral) wire. Connection of the bare or green fixture ground wire
to the black or white wires may cause metal parts of the fixture to carry electrical
currents, and may cause electrical shock, which could cause serious injury or death.
• Do not suspend any fixture by the house wires. Suspending a fixture by the house
wires and wire connectors may result in the fixture falling, possibly causing
personal injury and the danger of electrical shock or fire.
• It is recommended that a qualified electrician perform all wiring connections. All
electrical connections must be in accordance with all national and local electrical
codes.
• This light fixture is designed for use in a
110 – 120
VAC,
6
0
Hz fuse circuit. Not for use
on a dimming circuit.
• For indoor use only. Suitable for damp locations.
Warning:
• LED light output is strong enough to injure human eyes. Precautions must be taken to
prevent looking directly at the LEDs without installing the diffuser (cover) for more
than a few seconds.
• If the lighting light fixture is damaged, it shall be exclusively replaced by the
manufacturer or the service agent or qualified person in order to avoid a hazard.
• Do not tamper with or attempt to repair the LED component or fixture. The light
source is designed for this specific application and should not be serviced by
untrained personnel. Contact the customer service department if any servicing is required.
• The warnings, precautions, and instructions discussed in this manual cannot cover all
possible conditions and situations that may occur. The operator must understand that
common sense and caution are factors which cannot be built into this product, but
