Door Camera Installation
KC-MB30
Standard Height of
Door Camera
(unit:mm)
Bottom base of
One hall Box
Surface mount
Basic Installation method of Monitor
Standard Height of Monitor
(unit:mm)
Bottom of
1 Rectangular
switch box
Center of monitor
Rear
1
2
3
4
5
Rear
END
6
Wall hanger
pannel
Wall
3X8mm
Screw
4X25mm
Screw
4X25mm
Screw
4X8mm
Screw
Wrench
Name plate
After fix the rear bracket with 4 screw, put the Door Camera into the grooves of rear bracket,
and then fix it with hexagon screws and stick the finishing materials.
Rear Bracket
Standard wire strip specification : 6~7mm
Standard wire (AWG) : 16~24(0.5mm~1.2mm)
Camera Terminal Block
Monitor Installation
Door camera Installation
Standard height of monitor is 1,450~1,500mm from bottom to the center of monitor screen.
For installation, avoid the places where there is any excessive humidity, magnetic force, dangerous
chemicals, diret ray of sun, and any places near a heater which can cause break down.
Standard height of door camera is 1,400~1,450mm from the bottom of one camera to the floor.
In case that the height of Door camera exceeds the range of min. 1,250mm ~ 1,550mm, it is
impossible to control the screen picture with only the angle, and therefore, be careful of the
height of camera in insrallation.
KC-D20
KC-C63 / KC-B61
Wall
Screw(4X10mm)
Screw
(4X10mm)
Screw
(4X16mm)
Screw(2.6X6mm)
baby support
Upward support
Wall
Camera
front
Camera
front
Camera front
9
8