Instructions for operation
7
6
■ Communication with door camera
■ Communication with door camera
■ Camera monitoring
Push the call button.
The camera melody is
turned on.
Push the monitor button when
there is no image on monitor screen.
Camera image appears on screen.
(Monitoring time : 1 minute)
Push the monitoring button
2 times and the image of camera
2 appears.
You can hear call sound from
all connected monitors, and
camera image comes out on
screen.
(Standby time : 2 minutes)
Push the call button and
communicate with the door camera
(Call time : 3 minutes)
Push the call button again
and stop the communication.
Hello
Hello
Push the monitor button
again and stop the communication.
Press the call button while
monitoring and start to communicate
with the calling camera.
Press the call button again
and stop the communication with
the calling camera.
While communicating with
a camera,
Press the door open button
and open automatically the
door of the camera.
About 5 seconds after pushing
the button, call ends automatically.
Instructions for operation
Specification
■ Extension call & communication
□ Internal call sending mode
□ Internal Call Receiving Mode
While the screen is off,
push the call button
for 1 second.
The screen turns on and
‘INTERCOM Call' is written
on OSD.
(INTERCOM Call Standby time
: 1 minute)
When connected to the submonitor
and sub-audiophone, the
main monitor will show 'INTERCOM
Talk' on OSD and the
communication turns on.
(INTERCOM Talk time : 3 minutes)
Push the call button
and stop INTERCOM Call.
Hello
Hello
INTERCOM Call
INTERCOM Talk
When receiving a call from Sub
monitor
and sub-audiophone, the
main monitor shows 'INTERCOM
Call' on OSD.
(INTERCOM Call Standby time
: 1 minute)
Push the call button
and INTERCOM Talk starts.
Push the call button again
and stop INTERCOM Talk.
※ Caution : Push the call button for 1 second.
INTERCOM Call
INTERCOM Talk
-SD CARD
Maximum Available Capacity : 16G (HD)
SAND DISK
–
MLC Method, CLASS-4
KING MAX
–
MLC Method, CLASS-6
Bareun Electronics
–
MLC Method, CLASS-4
Be careful when use other SD Cards except listed above since they may cause error.
-Video Image Storage Resolution
NTSC : 704 X 480 15fps / PAL : 704 X 540 15fps / H.264 FORMAT : Mpeg4
-Image Storage Resolution
704 X 480 / JPEG FORMAT
- Playback the video image stored in SD CARD from PC.
PLAYER : WINDOW MEDIA PLAYER, GOM PLAYER, KMPLAYER
(WINDOW MEDIA PLAYER CODEC :
http://fileforum.betanews.com/detail/KLite-Codec-Pack-Standard/1094057842/2
Download and install klite codec standard version from above link.
