Component
’
s Name
Precautions for Operation
Keep away from humidifier and
stove. High temperature and
humidity can cause breakdown.
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Keep picture clear by cleaning
camera window frequently with
soft cloths.
As this device consists of
electronic precision
components, and high voltage
is generated internally, do not
attempt to disassemble.
Do not drop monitor or door
camera, and avoid strong
impact.
Keep away from devices
generating strong magnetic field
(TV, Speaker, etc.) (Picture can
be disturbed or blurred and
breakdown can result)
Installation Precautions
■
Monitor and camera must be installed away from direct
light and counter light.
■
Camera must be installed at a place free from rain.
■
Standard height of monitor must be 1,450mm~1,500mm
from ground, centered around brawn tube.
■
Camera should be installed on the wall in which cement
is completely dry.
■
If installed during winter season at temperature below
-5°
, condensation might be generated inside monitor and
camera due to temperature difference between indoors
and outdoors. To prevent breakdown due to such
condensation, connection should be made in 2 hours or
more after installation.
■
Do not install monitor and camera in locations subject to
direct heating as harmful gases may subsequently be
emitted in significant amounts.
※Stopping up pipe as above minimizes
temperature difference between indoors and outdoors, and
also eliminates moisture and condensation on door camera
window.
Stop up P.V.C. pipe using
adiabatic substances, to
prevent air circulation
■
C-MIC
To communicate with Monitor
■
Speaker
When visitor calls on the phone,
the sound of communication is amplifiled
and it comes out of the speaker.
■
Call Button
By pressing the button, the related
house will be called.
■
Camera Lens
Clear picture quality realized by
adopting Image Sensor
■
KC-MC35 Metal Pinhole Camera
■
KC-MC35 Surface-mounting Door Camera Installation
- 07 -
- 08 -
After attach the body supporter with 2 screws,
put the Door Camera into the grooves of body supporter,
and then fix it with 2 screws and stick the finishing materials.
Door camera Installation
Straight Ahead Installation
