: Audio lobbyphone
→
Monitor audio volume
Using a screwdriver, in) or decrease(-) the
volume from the Common gate camera to the house
: Interphone
→
Audio lobbyphone audio volume
Using a screwdriver, in) or decrease(-) the
volume from the house to the Common gate camera
Button Information
■
AUDIO LOBBYPHONE
KAL-S302
KAL-T308
KAL-T306
KAL-S304
KAL-S303
2 House
8 House
6 House
4 House
3 House
1
3
5
7
2
4
6
8
1
3
5
2
4
6
2
4
6
8
■
EXTENSION UNIT
KEL-A308
KEL-AT316
8 House
16 House
2
4
6
2
4
Wiring Connection
Operation Explanation
9
8
AUDIO LOBBYPHONE CONNECTION
AUDIO
LOBBYPHONE
AUDIO LOBBYPHONE
EXTENSION UNIT
EXTENSION CONNECTION
Terminal for door opener
(Extra adaptor is needed)
※
Door opener is output in N.O / N.C and is
used in connection in compliance with door
release specification.
Door
relese
Door
relese
Audio lobbyphone to household
Cable requirement
※
※
2 Pin terminal output : Installing status N.C mode / Disarm status N.O mode
up to 100m : CAT5 Cable (2group 4wire)
Black :
Normal
open
Brown :
Normal
close
Yellow :
Common
Yellow :
Common
DC
adaptor
Normal open
Normal close
DC
adaptor
■
Adjust audio
DOOR
RELEASE
DC+12V
300mA
HOUSE
NO.1
HOUSE
NO.2-1
HOUSE NO.1~8
DC+12V 300mA
Non-polarity
Non-polarity
polarity
security
sensor
DC
adaptor
NORMAL
OPEN
COMMON
NORMAL
CLOSE
DC+12V
1.5A
GND
DC 12V
adaptor
polarity
4 5 6 7 8
1 2 3
4 5 6 7 8
1 2 3
4 5 6 7 8
1 2 3
HOUSE NO.9~16
polarity
4 5 6 7 8
1 2 3
HOUSE NO.1~8
polarity
HOUSE NO.17~24
polarity
3
2
1
EXTENSION UNIT cannot be used without Audio lobbyphone
※
1. When the visitor presses the call button for certain house on the audio lobbyphone,
the certain house interphone gets call signal.
2. In case of hanging up the hand-set or pressing talk button, the conversation is available.
3. When finishing talk, put the hand-set onto the HOOK BAR or press talk button once again.
■
Communication with house interphone
1. Detecting security sensor and security mode
2. In case of security sensor is separating from wall, status is changing to N.C
→
N.O
3. Need to connecting extra security sensor (optional)
■
Security Function
1. During conversation with household interphone, if the door open button on the interphone is pressed,
the common gate is released, in case the door opener is equiped.
2. In order to connect the door opener to the 3 wire connection (polarity) on the
audio lobbyphone, you should use KIP-304 interphone only.
Cabling is 3 wires in common & 1 separate wire
for each house.
For 1 separate wire connection for each house
using ‘8 pin connecter’, please refer to the
numbers shown next to the buttons & detailed
wiring diagram at page 10 and 11.
※
■
Audio lobbyphone from house interphone
HOUSE
NO.2-2 (Option)
3
2
1
3
2
1
Option