User manual
4/4
Setting the ring tone (volume and choice of ring tone)
1. When in idle mode briefly press the
Menu button
.
The main menu appears on the monitor
screen.
2. Select the required parameter using the
Menu button
.
3. Adjust the value using the
Control buttons
UP
and
DOWN
.
4. The Menu either closes automatically after 10
seconds or immediately if you press the
Function button
.
Parameters in the Ring tone menu
Ring tone volume
Ring tone selection for
the Landing call
Ring tone selection
for the external
station of the AS 0
Ring tone selection for
an Internal call
Ring tone selection
for the external
station > AS 0
Ring tone selection
for sub-ring tones 1, 2,
3, 4 *
*
= to differentiate between the different ring tone buttons from the same external station
Care
Clean the Indoor video intercom unit with a dry or slightly damp cloth.
Use a household detergent to remove more stubborn stains.
Prevent any water from entering the unit!
Do not use any sharp or abrasive cleaning agents!
Subject to technical changes
sehen hören sprechen
voir entendre parler
René Koch AG
Seestrasse 241
8804 Au/Wädenswil
044 782 6000
044 782 6001 Fax
[email protected]
www.kochag.ch
