manualshive.com logo in svg

Kobold ZOK-ExK, Руководство по эксплуатации

Kobold ZOK-ExK - компактный и мощный устройство, идеально подходит для быстрого и эффективного управления вашим домом. Скачайте бесплатно операционное руководство на manualshive.com для получения подробной информации о использовании и настройке устройства. Не упустите шанс овладеть всеми его функциями и возможностями.

Поделиться
Скачать
background image

  

ZOK-E/-Z 

ZOK K14/0917 

 

Page 9 

7.4.4 

Battery operation (only ZOK-Z1/-Z3 with supply option 3) 

The options ZOK-Z1/-Z3/-E1/-E3 can also be powered by a battery. In battery mode, 
the device function scope is relatively limited: 

  All electrical outputs (switching outputs, analogue output, pulse output, status 

output) are disabled during battery operation.  

  The backlight of the display is switched off and cannot be turned on. 

  The sensor may only be used with passive reed switches, as they require no 

additional power supply. Usage of induction coils reduces the battery life. Other 
sensors, which require a sensor power for operation, are also not suitable for 
battery operation. 
 

During battery operation, there are four different types of sleep modes available under 
menu point ‘Display’ which can be selected by the user and are numbered from 0-3. 
 

 

Activation of sleep mode

 

The duration after which the electronics goes in SLEEP-Mode and SLEEP is 
displayed on the display can be adjusted, activated and deactivated with Menu 
point ‘Sleep Timeout’. If ‘Sleep Timeout’ is set to ‘0’, SLEEP-Mode is deactivated 
and the electronics will always work in Measuring Mode. The ‘Sleep Timeout’ can 
be adjusted from 0 to 1800 secs. After the ‘Timeout’ time has passed, the sleep 
mode chosen by the user will be activated.  
No linearization function is available during sleep modes.  
The counter values will be regularly updated in the internal processor. 
The flow rate will neither be updated in the processor, nor on the display. 

 
 

 

Monitoring of battery voltage during sleep mode 

In all sleep modes, after a count of 100 pulses, the battery voltage is monitored. If 
this monitoring shows that the voltage has gone below 3.2 V, then the counter 
values will be saved. 

NOTE: The counter values will be regularly saved in measuring mode and 
also in sleep mode if the battery voltage is at a critical level but however it 
will not happen during sleep mode with healthy battery. 

 

 

Battery status indication during sleep mode 

With the exception of sleep mode 0, the battery status will be indicated in two 
stages during normal measuring mode and all other sleep modes. In sleep mode 
with 3.2 battery voltage, ‘Low Bat’ will be displayed on the display and the symbol 
‘bat’ on the upper left side of the display will begin to flash. Here we recommend a 
battery replacement. Furthermore, in sleep mode when the voltage drops below 
3.1 V, ‘CHANGE BAT’ appears on the display. In this case, the battery must be 
replaced. 

 

 

Description of sleep modes  

Sleep mode 0 (Default) 

Sleep mode 0 is a mode with the lowest current consumption since the display will 
be switched off during this mode and only a key press will reactivate it for the 
duration of ‚Timeout‘ time. In Menu, the behaviour of the display remains the 
same. The menu can be further used by pressing keys anytime. 

 

Содержание ZOK-ExK





























































Отзывы:

Нет отзывов

Похожие инструкции для ZOK-ExK

VAKI Pico 2.5" Manual preview
Pico 2.5"
Бренд: VAKI Страницы: 14
TEC TEC FS-3600 Owner'S Manual preview
TEC FS-3600
Бренд: TEC Страницы: 146
Safescan 2985-SX User Manual preview
2985-SX
Бренд: Safescan Страницы: 28
Olympia ECR 465T-F Programming Instructions Manual preview
ECR 465T-F
Бренд: Olympia Страницы: 69
Nautilus Hyosung MONiMAX7800D Operator'S Manual preview
MONiMAX7800D
Бренд: Nautilus Hyosung Страницы: 100
Olivetti ECR 300 Quick Start Manual preview
ECR 300
Бренд: Olivetti Страницы: 2
Redlion CUB4L Manual preview
CUB4L
Бренд: Redlion Страницы: 4
Alberici AL66 Technical Manual preview
AL66
Бренд: Alberici Страницы: 60
HYOSUNG MX5100T Manual preview
MX5100T
Бренд: HYOSUNG Страницы: 28
HYOSUNG MONiMAX8300D Installation Manual preview
MONiMAX8300D
Бренд: HYOSUNG Страницы: 41
HYOSUNG NH-1800CE Operator'S Manual preview
NH-1800CE
Бренд: HYOSUNG Страницы: 286
HYOSUNG NH-2700CE Operator'S Manual preview
NH-2700CE
Бренд: HYOSUNG Страницы: 298
HYOSUNG NH-1800SE Manual preview
NH-1800SE
Бренд: HYOSUNG Страницы: 335
HYOSUNG NH-2700 Operator'S Manual preview
NH-2700
Бренд: HYOSUNG Страницы: 337
HYOSUNG NH-2700T Operator'S Manual preview
NH-2700T
Бренд: HYOSUNG Страницы: 344
Casio 140CR - Cash Register Manual preview
140CR - Cash Register
Бренд: Casio Страницы: 4
Casio CE-235 Service Manual preview
CE-235
Бренд: Casio Страницы: 47
Casio 140CR-272 Service Manual preview
140CR-272
Бренд: Casio Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды