SEN-86../87..
page 4
SEN-86../87.. K04/0618
G 1/2 A
R 16
z
* min.
Sealing acc. DIN 16288 Sealing with flat gasket
7
+0,2
G 1/2 A
R 16
z
* min.
7
+0,2
21,3
-0,2
G 1/4 A
R 16
z
* min.
7
20
,5
14
,5
14
,5
19
24
,5
24
,5
13
16
,5
9
+0,2
- 0
,5
- 0
,5
- 0
,5
+1
+1
+1
5. Operating
Principle
KOBOLD Pressure sensors model SEN-86 are inexpensive pressure sensors
with thick film ceramic pressure element. With their accuracy, reliability and
compact design, they are perfectly suitable for OEM applications in medium to
high quantities.
The materials and technology used make these pressure sensors insensitive to
chemically aggressive media and mechanical load.
Particularly hydraulics systems with their high and fast pressure peaks are thus
preferred applications.
6. Mechanical Connection and Putting to Operation
The place where pressure is taken should be prepared according the following
specifications for the screw-in threads.
For sealing, please use sealing discs acc. DIN 16258 or profile washers. The
maximum initial tension depends on the material, the shape of the used sealing
and the mechanical connection of the pressure sensor.
There should be no vibrations and/or no radiation of heat near the mounting
position of the sensors. Please pay attention that the given technical data’s are
not exceeded. After the mechanical and electrical connection the sensor works
immediately.
