NZJ
Model NZJ K03/0522
page 5
7. Electrical Connection
7.1.
Capacitive switch (option)
8. Operation
Capacitive proximity switches are designed for non-contact and wear-free
detection of metal (electrically conductive) and nonmetal (electrically non-
conductive) objects.
Installing of the capacitive switch
Slide the switch housing up until the glass tube is empty under the switch.
Set the switching state LED off by adjusting the potentiometer located the end
of the switch.
Slide the switch housing down until the glass tube is full under the switch.
The LED must be on. If not, repeat the process from the first step util the LED
on.
Adjustment of limit-values
The switch-point can be adjusted to the desired levels by using the clamping screw
on the holder of switch.
Reference edge:
approx. the middle of the sensor.
Slide the switch housing up or down until the reference edge coincides with the
desired switch- point scale reading.
BN
BU
pnp
BK
