aran_v02 or higher
NRF-100_KM Rev. : 1.0
16 / 04 / 2002
01 / 12 / 2002
Output :
4 - 20 mA , 2-wire
Maximum Loop
Resistance :
350
Ω
at 12VDC, 950
Ω
at 24VDC
Calibration :
Via 4 push-button switches
Capacitance range :
10 pF to 10000 pF
Resolution :
±0.1%
Linearity Due to
Temperature :
Negligible (less than 100 ppm)
Minimum Span :
10 pF
Accuracy and
Repeatability :
±1% of span or less
Output Damping :
One turn pot, 0 - 10 sec. delay
Sensing System :
Operating Temperature: Electronics -40° to 70°C
Capacitance
Maximum Probe
Frequency :
1.2 Mhz
Maximum Power at :
8 mW
Hazardous Areas:
Consult Factory
Power :
12 VDC - 36 VDC
Electrical Specifications :
Mechanical Specifications :
Enclosures
Standard :
NEMA 4 (
Polyamide
)
316 SS Fitting :
500 PSI @ 70°F, 250 PSI @ 300°F
100 PSI @ 350°F
Tri-Clamp :
Per tri-clamp rating
KOBOLD INSTRUMENTS, INC.
1801, Parkway View Drive, Pittsburgh, PA 15205
Telephone: (412) 788-2830 • FAX : (412) 788-4890
Web site : www.koboldusa.com
Example: L = 12” (30 cm) from the bottom of the tank
H1 = 72” (183 cm) from the bottom of the tank
H = 96” (244 cm) from the bottom of the tank
( 72 - 12 )
mA = -------------- x 16 + 4 = 15.43
( 96 - 12 )
The correct loop current is is 15.43mA.
Depress SPAN S-UP or S-DW buttons as required to
obtain a meter reading of 15.43mA. If 15.43mA reading
has been obtained, the calibration is complete.
Note: If a 15.43mA value cannot be reached, then
peform OFFSET AND RESET functions and re-start the
calibration
KOBOLD INSTRUMENTS CANADA, INC.
9A de l’Aviation, Pointe-Claire, Qc H9R 4Z2
Telephone : (514) 428-8090 • FAX: (514) 428-8899
Web site : www.kobold.com
Page 5
Optional:
St. Steel
Aluminum w/Epoxy Paint
Process Connection :
Many styles available, 3/4" NPT
standard
Maximum Pressure:
PTFE Fitting :
150 PSI @ 70°F, 0 PSI @ 300°F