Kobold NMC Series, Руководство по эксплуатации

Страница: 8 / 24

NMC
Páge 8 DT0305
3. This asks, where do you want the NMC gives us 4
mA. If you want it in 5 % of the probe. Using (+) and
(-) we indicate this value in the display. Confirm with
(OK)
4. We do the same for the 20 mA. In this case, if we
want this current in the 95 % of the probe, we will
indicate this value using (+) and (-).
Confirm with (OK)
5. Finished the adjustment, we can incorporate a filter
to avoid oscillations caused by quick movements of
the liquid’s surface. This value between 0 and 5
(maximum filter). Confirm with (OK)
6. Automatically return to output menu.
Pressing ESC return to measuring mode.
7. In this point, the NMC is adjusted. The number in
% indicates the height that reaches the level in the
probe (0 to 100). The value of the current will
depends f the adjustment of the points 3 and 4 of this
section, and it can be in any point of the probe. It
can be in maximum point and in the 20 mA at the
minimum.
9.3 Output simulate
1. Pressing any key, you enter in the main menu.
Press (+) to enter in Output.
2. Pressing (-), we enter in simulate output menu.
OUTPUT ADJUST
¿Where do you want the 4
mA output?
+ and - : 005.0 %

OK
OUTPUT ADJUST
¿Where do you want the 20
mA output?
+ and - : 095.0 %

OK
MEASURE FILTER
Enter filter’s level
0 to 5
+ and - : 1

OK
OUTPUT
Output SIM

-
Output Adj

+
Back

ESC
049.8%
12.04 mA
Calib.Probe

OK
Output

+
Language

-
Back

ESC
OUTPUT
Output SIM

-
Output Adj

+
Back

ESC