Kobold KAL-A Скачать руководство пользователя страница 3

  

KAL-A(K) 

KAL-A(K)  K05/1116 

 

Page 3 

2. Note 

Please read these operating instructions before unpacking and putting the unit 
into operation. Follow the instructions precisely as described herein.  
The devices are only to be used, maintained and serviced by persons familiar 
with these operating instructions and in accordance with local regulations 
applying to Health & Safety and prevention of accidents.  
 
When used in machines, the measuring unit should be used only when the 
machines fulfil the EC-machine guidelines. 
 
 
 

3. Instrument 

Inspection 

Instruments are inspected before shipping and sent out in perfect condition.  
Should damage to a device be visible, we recommend a thorough inspection of 
the delivery packaging. In case of damage, please inform your parcel service / 
forwarding agent immediately, since they are responsible for damages during 
transit. 

 
 
 

4. Regulation 

Use 

The KOBOLD 

KAL-A..

 Flow Meter is intended for use in measuring moderate 

flow rates of low-viscous or dirty liquids.  
The KOBOLD 

KAL-AK..

 Flow Meter is intended for use in measuring and 

monitoring moderate flow rates of low-viscous or dirty liquids.  
 

Analogue Output / Limiting Signal 

For measuring the flow rate of the liquids the device is equipped with a 4-20 mA 
output signal. Additionally the model KAL-AK.. is equipped with a limit switch 
(NPN or PNP). 
 

Trend Display 

A LED bar graph display indicates the current flow rate and the set point  
(KAL-AK) via a flashing LED

 

Sensor 

The model KAL-A and KAL-AK consists of a sensor with integrated electronic. 
The devices may only be used for liquids to which the probe material is resistant. 
With proper installation and maintenance, the probes are not sensitive to soiling 
and cause practically no pressure loss. 

Содержание KAL-A
















Отзывы: