Heinrichs Messtechnik GmbH
EX-Supplementary Operating Manual
HPC Mass Flow Meter
Page 5 of 20
1.1
Hazard warnings
The purpose of the hazard warnings listed below is to ensure that device operators and maintenance
personnel are not injured and that the flow meter and any devices connected to it are not damaged.
The safety advisories and hazard warnings in the present document that aim to avoid placing operators and
maintenance personnel at risk and to avoid material damage are prioritized using the terms listed below,
which are defined as follows in regard to the instructions herein and the advisories pertaining to the device
itself.
Warning
means that failure to take the prescribed precautions could result in injury, substantial material
damage or even death. Always comply to these warnings and proceed with caution.
Caution
means that failure to take the prescribed precaution could result in material damage or
destruction of the device. We advice always to abide to these instructions!
Note
means that the accompanying text contains important information about the product, handling
the product or about a section of the documentation that is of particular importance.
1.2
Proper use of the device
Warning
The operator is responsible for ensuring that the material used in the sensor and
transmitter housing is suitable and that such material meets the requirements for the fluid
being used and the ambient site conditions. The manufacturer accepts no responsibility in
regard to such material and housing.
Warning
In order for the device to perform correctly and safely, it must be shipped, stored, set up,
mounted operated and maintained properly.
