Heinrichs Messtechnik GmbH
Page 4 of 20
EX-Supplementary Operating Manual
HPC Mass Flow Meter
1
Steps prior to operation
Prior to installation and operation, it is essential that the operator familiarizes himself
with all of the instructions and information contained in the manual for non-explosion
proof Coriolis flow meters as well as the present instructions. If any part of either
manual is missing, contact Heinrichs Messtechnik GmbH to request a new manual.
These manuals can also be downloaded from our website.
The HPC sensors described herein are only to be used to measure mass and volume
flow, as well as liquid and gas density and temperature, in conjunction with a transmitter certified for use in
the area and country of operation.
1.1
Installation, mounting, commissioning and maintenance
Installation, mounting, commissioning and maintenance are to be performed by a technician trained to work
with explosion-proof devices, or by a Heinrichs Messtechnik service technician.
Warning
Any safety relevant maintenance or repairs in terms of explosion-protection is to be carried
out by the manufacturer, an authorized Heinrichs Messtechnik GmbH service centre or
under the supervision of an expert in explosion proof devices.
Heinrichs Messtechnik GmbH accepts no liability for any loss or damage of any kind arising from improper
operation of any product, improper handling or use of any replacement part, or from external electrical or
mechanical effects, overvoltage or lightning. Any such improper operation, use or handling shall
automatically invalidate the warranty for the product concerned.
In the event of a problem please contact the service centre of Heinrichs Messtechnik:
Phone:
+49 221 49708-0
Fax:
+49 221 49708-178
Internet:
Email:
Contact our customer service department if your device needs repair or if you need assistance in diagnosing a
problem with your device.
