AFS-G1
AFS-G1 K04/1019
page 5
6. Mechanical Connection
The Hygrostat must not come into direct contact with water (e.g. splashed
water when cleaning the climatic chamber etc.)
The mounting location should be chosen so that a representative
measurement of the air humidity can be guaranteed, i.e. the humidity readings
at the mounting location should correspond to those in the room as much as
possible.
The Hygrostat should be exposed to the flow of air.
The installation position should be chosen to prevent condensed water from
entering the housing. The preferred installation position is "sensor vertically
pointing downwards" or "sensor horizontal". A blanking plate in the probe with
a 0,8 mm diameter hole prevents penetration of water in the installation
positions described above.
Installation position
7.
