©
KÖBER SRL VADURI
BRANCH
21
9.8 BOILER switch off in safety conditions
If the user observes abnormal functioning of the equipment, if error codes are displayed
repreatedly or if the user cannot understand the actions of the central heating BOILER, the user
must stop the functioning of the BOILER immediately and in maximum safety conditions. For this, the
user must perform the following operations:
- Press
ON-OFF
key and interrupt the functioning of the BOILER;
-Disconnect the central heating BOILER from the main power line by unplugging it (if applicable);
- Interrupt the fuel circuit by turning off the gas taps;
-Interrupt the flow of house water and of heatined water by turning off the corresponding taps for
these circuits;
After the BOILER is switched off in safety conditions, the user will contact the authorized service
company in the area.
9.9
User training
It is obligatory for the specialized personnel commissioning the BOILER to instruct the user about the
following aspects:
1.
Central heating BOILER switch on/ off procedure in safety conditions by checking the following
elements:
- electrical power connection;
- fuel (gas) connection;
- feeding and filling the thermal circuit;
- the BOILER filling tap must be turned off;
- the pressure in the installation by reading the control panel (
);
1.5bar
- the BOILER taps on the house water circuit must be turned on.
2.
The functioning way of the BOILER and possible problems that may occur. Also each key and symbol on
the control panel must be explained.
3.
Warn the user that a drop in the water pressure of the system is caused by loss of thermal agent which
needs to be mended before using the BOILER again.
4.
Warn the user on the works performed on the air/ gases input/ output systems. Warn the user that
changing them is strictly forbidden.
5.
It is recommended that the user should have the BOILER verified by an authorized person at least once a
year.
6.
Warn the user about the the precautions that need to be taken against freezing.
7.
Hand the user the user manual of the central heating BOILER.
At the end of training a commissioning statement is signed (table 2), by which the user signs that they are
aware of the correct way of using the central heating BOILER. .
This statement is also signed by the authorized person who commissioned the central heating BOILER.
The authorised person who commissions the BOILER has the right to refuse to sign the BOILER commissioning
statement if they notice defects of the local connecting installations and will not sign the commissioning
statement until these defects have been remedied.
9.10 Quality Conditions and Warranty
The company KÖBER S.R.L. - VADURI BRANCH as the manufacturer, guarantees the correct
functioning of the central heating BOILER if are observed ALL conditions for the installation,
commissioning, use and periodical technical revision established in the “Warranty Certificate”
given by the manufacturer and signed by the authorized company in the presence of the
beneficiary when the product is purchased.
The Warranty Certificate that comes with the product details all the limits of the warranty. Please
carefully follow the directions in the Warranty Certificate and before reporting any
malfunctioning of the BOILER make sure that all the local connecting installations are of the
required quality!
Caution!
Not observing the conditions of the warranty certificate results in losing warranty!
EN
USER MANUAL C33GC24