7065-SBXX Power Assist Cylinder
Kobelt Manufacturing Co. Ltd
Rev A
MNL-7065-SBXX
4 of 18
1.2.2
Notice to Installer
Disregarding the following safety measures can result in an accident-causing severe injury to
personnel and damage to material assets.
•
Only use the product as directed in this manual.
•
Never put the product into service if there is evidence of visible damage.
•
Never put the product into service before fully completing installation and
commissioning.
•
Do not carry out any modifications to the product.
•
Only use authentic Kobelt spare parts.
•
Observe all local regulations, directives and laws during the installation of this product.
•
All installation, commissioning, and maintenance work must only be conducted by
qualified personnel. (For the purpose of this manual, qualified personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of the
product and who have the qualifications necessary for their occupation.)
•
Observe all specifications in this manual. If these guidelines are not followed and
damage occurs, the warranty will be voided.
1.2.3
Product Hazards
The moving components of the cylinder can generate forces
that can cause pinch or crush injuries. Keep body parts clear of
the unit when it is operating. Lock out any power sources
before working on the unit.
Exercise safety precautions pertaining to hydraulics including:
•
Wearing safety glasses.
•
Exhausting pressure and locking out the pressure
source.
•
Being qualified to work on hydraulics.
•
Never look for a leak by running your hand/fingers
along a pressurized hydraulic line.
To ensure the product does not get damaged during storage,
transportation and installation:
•
Store the unit with the cylinder fully retracted.
•
Ensure all plugs remain in place until the unit is ready
to be connected to hydraulics.
