Kobelt 5022-H, Руководство владельца по эксплуатации, установке и техническому обслуживанию

Страница: 17 / 29

KOBELT MANUFACTURING CO. LTD MNL-5022-H.docx (rev A) 17
5 M
AINTENANCE
5.1 P
REVENTATIVE
M
AINTENANCE
Maintenance Schedule
Maintenance Item
Monthly Annually
5 years
Inspect for leaks
✓
Measure air gap
✓
Determine pad life
✓
Lubricate pivot pins
✓
Inspect brake disc
✓
Torque Test
✓
Inspect Brake pins
✓
Service Actuators
✓
5.2 I
NSPECTION
5.2.1 Pad Wear
The running clearance (air gap) between lining and disc must be maintained within the specified
limits. Failure to do so will result in sluggish brake response and excessive air consumption.
When the running clearance has reached 0.04” [1 mm] the brake must be adjusted back to 0.01”
[0.25 mm] per shoe. Refer to section 5.3.2 .
For pressure applied brakes maintain the proper running clearance between the shoe and the
disc to ensure fast response and minimize the air consumption.
The maximum allowable pad life has been reached when the brake pad has worn down to 3/16”
[4.8 mm] thick. The lining must be replaced before the shoe lining bolts or rivets start making
contact with the brake disc.
5.2.2 Seals
The actuator seals should be inspected on a periodic basis. For air applied brakes apply air
pressure to the actuators and listen for any hissing sound that would indicate a torn or ruptured
diaphragm.