8
Hood Installation
Figure 7
19. Slide the hood into the opening where it will be
installed.
20. Locate the screw holes (4) on each side of the insert.
Adjust the level of the hood casing support according
to the thickness of the base (1/2 thickness plywood
recommended
– Refer to Figure 3).
21. Secure the hood using screw holes that are located in
front and back of unit (screws provided). Refer to
Figure 7.
22. Make sure the hood casing support is secure before
releasing.
CAUTION:
MAKE SURE HOOD IS SECURE
BEFORE RELEASING.
Final Assembly
23. Install Airflow Efficiency Panel(s) underneath the hood.
24. Make sure the Airflow Efficiency Panel(s) is secure
before releasing.
