48
Press key
【
Load
】
to enter loading state with the blue sign ‘▲’ displaying.
After shoveling materials into the bucket, flip the bucket upward to the limit position. Then
the magnet blocks on the lift-arm should be under the proximity switch.
After the wheel loader reached the loading position with relatively flat ground, lift the lift-arm
and bucket with the accelerator at the actual loading operation state and do the best to keep
the accelerator stable.
After the
Magnet Block
passed by the Weighing Segment, display the blue sign ‘▼’ and the
present Single-bucket-loading-weight.
If there is no sound-light alarm and the prompt message is ‘ADD’, it means that the present
Single-bucket-loading-weight has been added to Totalized Loading Weight automatically and it’s
allowed to discharge materials from the bucket.
If there is a sound-light alarm and the prompt message is ‘ADD’, it means that the present
Single-bucket-loading-weight has been added to Totalized Loading Weight automatically. If you
press
key
【
Void
】
to
Cancel Totalizing, then
the prompt message will be ‘NO ADD’, then
it’s not allowed
to discharge materials from the bucket, and It’s need to
lift the lift-arm
and bucket
for weighing again.
If there is a sound-light alarm and the prompt message is ‘NO ADD’, it means that the present
Single-bucket-loading-weight has not been added to Totalized Loading Weight and it’s not allowed to
discharge materials from the bucket. It’s need to l
ift the lift-arm
for weighing again.
After weighing finished, flip the bucket downward for discharging materials.
After the bucket going down to the lowest position, the weighing indicator will display the
blue sign ‘▲’ again, and enter the working process of the next bucket.
“Last Bucket” Prompt: The display area of ‘Totalized Loading Weight’ will change to red
background if ‘Negative Deviation Value<3t’, it means that the next bucket may be the last
one, the operator should determine the loading weight of the next bucket according to the
actual Negative Deviation Value.
After Totalized Loading Weight reached setpoint, press key
【
Finish
】
to save and print
Loading Record, and Clear Screen automatically after Loading process finished.
When you need to pause, please press key
【
Pause
】
to display the red sign ‘
■
’ .
Before going off work, turn the power switch of weighing indicator off at first, then turn the
power switch of wheel loader off.
Other Attentions
Try to choose a level ground or a ground with the angle less than 15 degrees for weighing and
System Calibration.
Try to avoid weighing in the wheel loader moving process. If you need to do it, the moving
speed should be controlled under 10km/h.
To avoid the water splashing on the weighing indicator when cleaning the wheel loader.
