www.grupotemper.com 15
KTIR-1050
Non-Contact Infrared Thermometers
3.
Wireless Transmit is allowed to use within a 30m
area.
Note: Data will only be transmitted under SCAN
state.
Note: Measurement considerations
Holding the meter by its handle, point the IR Sensor
toward the object whose temperature is to be measured.
The meter automatically compensates for temperature
deviations from ambient temperature. Keep in mind that
it will take up to 30 minutes to adjust to wide ambient
temperatures are to be measured followed by high
temperature measurements, some time (several
minutes) is required after the low (and before the high)
temperature measurements are made.
This is a result of the cooling process, which must take
place for the IR sensor.
7. BATTERY
REPLACEMENT
①
As battery power is not sufficient, LCD will display
“ ” replacement with one new 9V battery is
required.