11
ASSEMBLY INSTRUCTIONS
5
6
6. Connect the air supply hose to the male air
plug (See Figure 6), making sure it is
completely seated and secure. Set the
working pressure at 90 PSI for best tool
performance.
5. For a longer reach, mount the socket onto
the end of an extension bar (not provided)
and then mount the extension bar onto the
anvil (See Figure 5).
TM
Working pressure is the amount of
air pressure the tool sees when operating.
NOTE:
4
B
4. Select the correct impact socket
(not included) and mount it onto
the anvil (B) until it clicks into place
(See Figure 4).
Use only adapters and sockets with a torque
rating equal to or greater than the tool itself.
Always make sure adapters and sockets are
properly mounted and secure before using
the tool. Loose attachments can break or fly
off, causing serious injury to the operator or
bystanders in the work area. Always follow
all manufacturers’ specifications for proper
attachment and use.
WARNING
NOTE:
Make sure the socket and extension
bar are securely fastened before operating
the tool.
B
