OPERATING INSTRUCTIONS
1
2
13
-
+
E
1. The palm sander includes a regulator to adjust
the tool speed. Tool speed is adjusted by the air
regulator knob (D) rolling the knob backwards
(faster) or forwards (slower) as shown in Fig. 2.
Minimum tool speed is indicated when the knob
indicator is fully forward. Maximum tool speed is
indicated when the knob indicator is fully
backward.
2. To sand a workpiece, first ensure that tool
speed is set to the slowest setting. Slowly press
the trigger (E) to start the tool as shown in Fig. 1.
It may be helpful to support the tool with both
hands during startup.
3. Gradually increase tool speed as needed for
your particular sanding application. NEVER
start sanding with the tool at the highest speed
setting.
Always make sure the workpiece is secure.
Do not apply excessive force to the tool;
let the tool perform the work.
WARNING