6
kobalttools.com
SAFETY INFORMATION
•
NEVER
use a water supply to your power washer that exceeds 150 PSI maximum.
•
NEVER
disconnect the high pressure hose from the power washer while the system is pressurized.
•
NEVER
permanently engage the trigger mechanisms on the spray gun.
•
NEVER
operate the power washer unless all components are properly and securely connected.
•
NEVER
allow the power washer pump to run for more than one minute after you have turned off the
water supply. This can cause the motor and pump to overheat and fail.
•
NEVER
use lances or other parts that have not been supplied with your power washer.
•
NEVER
use an extension power cord.
•
NEVER
spray any electrical outlet with your power washer.
• Inspect the power cord before using. Do not use it if it is damaged.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
5 minutes
Tools Required for Assembly (not included): Phillips
screwdriver
Remove Power Washer Unit from Frame Before
Assembly
• Locate latches on the lower side of frame. Unlock
latches by pulling downward on the latches. Place
a foot on the pad at the front of the lower frame and
then lift the power washer unit off the frame.
3
2
1